Sublimation printing wash is a type of digital printing that uses a heat transfer process to print images onto fabric. This printing method is often used for sportswear, as it allows for vibrant and durable prints. Sublimation printing wash is also sometimes known as “dye sublimation printing.”
The sublimation printing wash process begins with a digital file of the image that is to be printed. This file is then printed onto a sheet of transfer paper using a sublimation printer. The transfer paper is then placed on the fabric, and both are placed under heat and pressure. The heat causes the dye on the transfer paper to turn into a gas, and it bonds with the fibers of the fabric. The result is a vibrant and durable print that will not fade or crack over time.
Sublimation printing wash is an ideal printing method for sportswear and other garments that will see a lot of wear and tear, as the prints are highly resistant to fading and cracking. Sublimation printing wash is also a great choice for prints that need to be very vibrant and detailed, as the printing process allows for a high degree of control over the final image.
Wash Sublimation Shirts Easily
If you want to wash your sublimation shirts easily, there are a few things you need to do. First, turn the shirt inside out before washing it. This will help protect the print from fading or cracking. Second, use cold water and a mild detergent to wash the shirt. Avoid using bleach or other harsh chemicals, as these can damage the print. Finally, hang the shirt to dry, or tumble dry on low heat.
Start with cold water:
Warm water, hot water, or even boiling water will cause the dyes in your print to begin to bleed. This can ruin your shirt and cause the colors to run together. To avoid this, always start with cold water when washing your sublimation shirts.
Never Add Bleach or Fabric Softener:
Bleach and fabric softener are two of the worst enemies of sublimation prints. Bleach will cause the dyes to fade, while fabric softener will coat the fibers of the shirt and prevent the dyes from bonding properly. If you want your shirts to last, avoid using these products altogether.
Don’t Use Too Much Detergent:
A little bit of detergent goes a long way when washing sublimation shirts. Using too much detergent can cause the colors to run, so be sure to use only a small amount.
Rinse and Then Hang Dry:
After washing your shirt, be sure to rinse it thoroughly. Any detergent that is left on the shirt can cause the colors to bleed when the shirt is heated during the printing process. Once your shirt is rinsed, hang it up to dry or tumble dry on low heat.
Iron Your Shirt While Still Slightly Wet:
If you want to remove any wrinkles from your shirt, iron it while it is still slightly damp. This will help to set the print and prevent the colors from bleeding. Be sure to use a pressing cloth between the iron and the shirt to protect the print.
Re-Sublimate When Needed:
Even with proper care, sublimation prints will eventually begin to fade. If you want to keep your shirts looking their best, re-sublimate them every few months. This process will refresh the colors and help to keep your shirts looking new.
Sublimation Shirts Laundering Quick Tips:
- Always turn the shirt inside out before washing
- Use cold water and mild detergent
- Avoid bleach or fabric softener
- Hang dry or tumble dry on low heat
- Iron while still slightly damp
- Re-sublimate every few months for best results
Printer Latest Review
Sublimation printing wash is a great way to get vibrant and durable prints on your shirts. The key to keeping your shirts looking their best is to take care of them properly. Always wash in cold water, avoid Bleach and fabric softener, and re-sublimate every few months to keep the colors fresh.
We hope you found this Sublimation Printing Wash guide helpful. If you have any questions or comments, please feel free to leave them below. Thanks for reading!